Adjusts the output volume level. At higher settings, the output stage will begin to breakup into natural overdrive. Experiment further with the Output switch to achieve the desired output level and response.
Note: with the Gain set to zero, no sound will be heard.
The jewel light will illuminate when the mains switch is set to ON. The Output switch should be set to STANDBY prior to performance. Refer to ‘Before Using Your Amplifier’.
Refer to ‘Before Using Your Amplifier‘ for full speaker cabinet options. If you are unsure, please contact your Orange dealer.
This fuse will blow in the event of output valve failure. Replace this fuse only with the exact type and rating as printed on the chassis.
Voltage Selector (side panel)
Refer to ‘Before Using Your Amplifier‘.
Fuses & Valves
Mains fuse (230V): T500mA
Mains fuse (100/120V): T1A
HT fuse: F250mA
Preamp and phase inverter: 3 x ECC83/12AX7
Effects loop: 1 x ECC81/12AT7
Poweramp: 2 x EL84